You are here

oDroid Accessories

oDroid Accessories

We supply a large range of accessories available for the oDroid development boards.  

Description Price
USB3.0 eMMC Module Writer R
IR Remote R99
USB WiFi Module 3 R220
USB WiFi Module 5 R530
USB Audio Adapter R90
OV 32gb micro SDHC pro -class 10 R370
DM 16GB micro sd card - class 10 R200
DM 32GB micro sd card - class 10 R260
DM 64GB micro sd card - class 10 R520
Estrella ultra-fast SD micro sd card - class 10 R240
MIXZA 32GB micro sd card 3.0 R110
RTC Shield TBA
USB3.0 to SATA Bridge Board Plus TBA
Level Shifter: 5V to 3.3 TBA
Ultrasonic Ranging Module HC – SR04 TBA
myAHRS+ TBA

 

USB3.0 eMMC Module Writer

An easier and faster way to flash your OS image into the eMMC Module.

– USB 3.0 Interface
– Native eMMC 8bit wide data interface, instead of slow SD 4bit width
– Works in HS200 mode
– Windows / Mac / Linux Compatible
– Works with ODROID Orange, Red and Blue eMMC modules
– Use with Etcher or Win32DiskImager software on your PC
– It can’t access the eMMC hidden boot blocks
– Rated Power : 5V/500mA (including eMMC module)
– Dimensions : 60x26x4.5 mm

 

oDroid IR Remote

Works with the ODROID-C1 on-board IR receiver.

Infrared remote controller
12 Keys function
37.9Khz Carrier Frequency
NEC standard protocol
Keymaps
- Power
- Mute
- Home
- Up (Up Arrow)

- Down (Dn Arrow)
- Left (Left Arrow)
- Right (Right Arrow)
- OK (Enter)
- Menu

<>- Back (ESC)
- Vol +- Vol -
AAA batteries(not included)

 

USB WiFi Module 3

The Realtek RTL8188CUS-GR is a highly integrated single-chip Wireless LAN (WLAN) USB2.0 network interface controller compatible with the 802.11n specification. Android and Linux compatible. It combines a MAC, a 1T1R capable baseband, and RF in a single chip. The RTL8188CUS provides a complete solution for a high throughput performance wireless client.

 

 

 

 

 

 

 

USB Wifi Module 5

This USB module works with ODROID-XU4 / C2 / C1+ /C0 and is compatible with Android and Linux. IEEE 802.11ac/a/b/g/n WLAN module with on-board 2.4Ghz and 5Ghz Dual band antenna.

 - Realtek RTL8812AU chipset (ID = 0bda:8812)
 - Dual-Band MIMO 2x2 Solution (11ac 2x2 MAC/BB/RF+PA)
 - USB 3.0 Super-Speed interface (Compatible with USB2.0)
 - LED for WiFi Link Activity and button of WPS
 - Dimension : 77 x 27.5 x 9.5 mm
 - Weight : 14g

 

USB Audio Adapter

This USB Audio Adapter works with ODROID-C1 / XU4 / C0 / C2 and has a CM108AH which is a highly integrated single-chip USB audio solution.  This has a dual DAC and headphone amplifier, ADC, microphone booster, PLL, regulator, and USB transceiver and All essential analog modules are embedded in CM108AH.

- USB 2.0 Full-speed(12Mbps) Specification
- USB Audio Device Class Specification 1.0
- USB bus-powered mode
- Connectors:
  USB Type-A
  A stereo output jack (3.5mm)
  Mono microphone input jack (3.5mm)

 

 

 

 

 

 

RTC Shield

Real-Time Clock Shield for the ODROID-C2 that can just mount on the GPIO port of the ODROID-C2 to keep the time when your ODROID is offline. A Lithium-coin battery can keep the RTC chip running up to 5~6 years without external power supply.

WiKi : https://wiki.odroid.com/accessory/add-on_boards/rtc_shield
 

 

USB3.0 to SATA Bridge Board Plus

Boost your XU4 to the next level of storage performance with SSD or HDD.
This board contains a USB3.0 to SATA3 controller (JMicron JMS578) allowing interfacing of a single 2.5″ SATA HDD/SDD. Archive over ~260MB/sec transfer speed with UAS capability.

USB3.0 to SATA Bridge Board offers data and power to the storage.  This board works with ODROID-C1/C2 at USB2.0 speed.

 

Level Shifter : 5V to 3.3V

4 channel IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V.
The bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. 

Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the HV’ pin, low voltage (3.3V for example) to LV’, and ground from the system to the GND’ pin.

Dimensions: 16.05 x 13.33mm

example:  https://wiki.odroid.com/odroid_go/arduino/31_ultrasonic_distance_meter+

 

Ultrasonic Ranging Module HC – SR04

Ultrasonic ranging module HC – SR04 provides 2cm – 400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules include ultrasonic transmitters, receiver and control circuit. The basic principle of work:
(1) Using IO trigger for at least 10us high-level signal,
(2) The Module automatically sends eight 40 kHz and detects whether there is a pulse signal back.
(3) IF the signal back, through high level, time of high output IO duration is the time from sending ultrasonic to returning.

Test distance = (high level time×velocity of sound (340M/S) / 2

example : https://wiki.odroid.com/odroid_go/arduino/31_ultrasonic_distance_meter

 

myAHRS+

The myAHRS+ is a high-performance AHRS(Attitude Heading Reference System), Its attitude output is more stable to acceleration and magnetic disturbances.  Communication and configuration are enabled via the UART/USB interface for user applications. I2C interface is available for embedded applications like Arduino projects.

The GUI(myAHRS+ Monitor) is available, which allows users to configure all myAHRS+ settings, view attitude of myAHRS+ and IMU(Inertial Measurement Unit) data in realtime and save sensor data in a text file.  Custom user software may be developed using the myAHRS+ SDK.

FEATURES

* Sensors
– Triple axis 16-bit gyroscope: ± 2000 DPS
– Triple axis 16-bit accelerometer: ± 16 g
– Triple axis 13-bit magnetometer: ± 1200 μT
* On-board software
– Extended Kalman filter
– max 100 Hz output rate
Attitude: Euler angle, Quaternion
Sensor: acceleration, rotation rate, magnetic field
* Connectivity
– USB: Virtual COM PORT
– UART: Standard baud rates up to 460800 bps
– I2C: up to 1kHz
* GUI(myAHRS+ Monitor)
– display attitude and sensor data from myAHRS+ on various viewers
– Configuration
– magnetometer calibration

Dimensions : 21 x 27 mm

 

DM Micro_SD16_GB

DM Micro_SD32_GB

Estrella Micro_SD_32GB

Mixda Micro_SD_32GB

OV Micro_sd_32GB