You are here

oDroid C1+ - A powerful single board computer

The ODROID-C1+ is a powerful, low-cost, single board computer that offers raw power for the same price as a Raspberry PI.  Boasting a quad-core Amlogic processor, advanced Mali GPU, and Gigabit Ethernet, it can function as a:

  • home theatre system,
  •  set-top box,
  • general purpose computer for web browsing, gaming and socializing,
  • compact tool for college or office work,

     

  • prototyping device for hardware tinkering,
  • controller for home automation,
  • workstation for software development,
  • and much more.

oDroid for Raw Computing Power

 

Operating systems that run on the ODROID-C1+ include:

  • Linux based distor - Ubuntu, Fedora, ARCHLinux, Debian, and OpenELEC
  • Android

The ODROID-C1+ is an ARM device , the most widely used architecture for mobile devices and embedded 32-bit computing. The ARM processor’s small size, reduced complexity and low power consumption makes it very suitable for miniaturized devices such as wearables and embedded controllers.

oDroid C1+ from HardKernel R799 incl vat
Contact us for a quote
contact details
  • Amlogic ARM® Cortex®-A5(ARMv7) 1.5Ghz quad core CPUs
  • Mali™-450 MP2 GPU (OpenGL ES 2.0/1.1 enabled for Linux and Android)
  • 1Gbyte DDR3 SDRAM
  • Gigabit Ethernet
  • 40pin GPIOs + 7pin I2S
  • eMMC4.5 HS200 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot
  • USB 2.0 Host x 4, USB OTG x 1 (power + data capable)
  • Infrared(IR) Receiver
  • Ubuntu or Android OS

oDroid versus the Raspberry PI

ODROID C1 which is a single board computer runs Linux and Android, gets ahead of the Raspberry Pi2 in terms of speed and is the clear winner if you need Android support.

The two main Android features that distinguish the ODROID-C1 are support for sound over HDMI and support for USB flash drives. The ODROID-C1 supports higher performance SD cards and eMMC modules.

The ODROID-C1 board has more CPU processing power, performs much better to move data between a USB drive to the network faster and is the only board to currently support Android.

ODroid Accessories

 

Cases & eMMC Modules

 

The ODroid C1+ casing protects your board from dust and the elements and looks stylish to boot. With breakout tabs for the IO section meaning that you can choose whether to use the IO connections or not.

 

 

 

 

 

 

 

 

 

Power Supply

  • AC 100~240 Volt input
  • DC 5Volt / 2A output
  •  
oDroid C1 Accessories
Description Price
oDroid C1+ Case R150
emmC 8 GB Module R607
emmC 16 GB Module R887
emmC 32 GB Module R1,307
IR Remote R99
Power Adatper R135
USB WiFi Module 3 R140
USB WiFi Module 5 R420
USB Audio Adapter R90

IR Remote Controller

Works with the ODROID-C1 on-board IR receiver


Infrared remote controller
12 Keys function
37.9Khz Carrier Frequency
NEC standard protocol

Key maps
- Power
- Mute
- Home
- Up (Up Arrow)
- Down (Dn Arrow)
- Left (Left Arrow)
- Right (Right Arrow)
- OK (Enter)
- Menu

<>- Back (ESC)
- Vol +
- Vol -

AAA batteries(not included)

 

USB WiFi Module 3

The Realtek RTL8188CUS-GR is a highly integrated single-chip Wireless LAN (WLAN) USB2.0 network interface controller compatible with the 802.11n specification. Android and Linux compatible. It combines a MAC, a 1T1R capable baseband, and RF in a single chip. The RTL8188CUS provides a complete solution for a high throughput performance wireless client.


USB Wifi Module 5

 

This USB module works with ODROID-XU4 / C2 / C1+ /C0 and is compatible with Android and Linux. IEEE 802.11ac/a/b/g/n WLAN module with on-board 2.4Ghz and 5Ghz Dual band antenna.

 - Realtek RTL8812AU chipset (ID = 0bda:8812)
 - Dual-Band MIMO 2x2 Solution (11ac 2x2 MAC/BB/RF+PA)
 - USB 3.0 Super-Speed interface (Compatible with USB2.0 too)
 - LED for WiFi Link Activity and button of WPS
 - Dimension : 77 x 27.5 x 9.5 mm
 - Weight : 14g

USB Audio Adapter

This USB Audio Adapter works with ODROID-C1 / XU4 / C0 / C2 and has a CM108AH which is a highly integrated single chip USB audio solution.  This has a dual DAC and headphone amplifier, ADC, microphone booster, PLL, regulator, and USB transceiver and All essential analog modules are embedded in CM108AH.

- USB 2.0 Full-speed(12Mbps) Specification
- USB Audio Device Class Specification 1.0
- USB bus-powered mode
- Connectors:
  USB Type-A
  Stereo output jack (3.5mm)
  Mono microphone input jack (3.5mm)

- Dimension : 60 x 30 x 15 mm approx
- Cable length : 130mm
- Weight : 33g