You are here

Banana PI Router Board

The Banana Pi Router Board is a 300Mbps Wireless N Router, which supports both wired and wireless network connections and is designed specically for smart home networking use. It has a 2T2R MIMO Technology and two detachable antennas, the R1 is the dual core Android 4.2. which runs very smoothly and has a  Gigabit ethernet port and SATA Socket, it support 1080P high definition video output. The R1 is a open hardware router that can run on a variety of open source operating systems including OpenWrt, Android and Bananian. The R1 slim router form factor comes with a bay for a 2.5" HDDs and also has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.

Banana PI Router Board     R TBA 
Contact us for a quote
contact details

The wonderful thing is that anyone wanting to build projects as a developer with this technology can do so. DIYers, and tech loving people within our community are doing this daily and are inspiring us all.


Key Features

  •     Dual-core 1.0GHz   CPU.
  •     1 GB DDR3 memeory.
  •     Mali-400 MP2 with Open GL ES 2.0/1.1.
  •     4x Gigabit LAN 1x Gigabit WAN




The Banana PI BPI-M1 a dual core, Open Source hardware platform The Banana Pi BPI-M1 hardware runs an Android OS, Debian Linux, Ubuntu Linux, OpenSuse linux and images. It has a Gigabit Ethernet port and a SATA Socket and runs Android 4.2.2 very smoothly.  The size of Banana PI M1 is about the same size as a credit card, the board is capable of running games as it supports 1080P high definition video output.

   Banana PI BPI-M1 R TBA 
Contact us for a quote
contact details




  • CPU: A20 ARM Cortex™-A7 Dual-Core
  • GPU: ARM Mali400MP2Complies with OpenGL ES 2.0/1.1
  • Memory: (SDRAM) 1GB DDR3 (shared with GPU)
  • Onboard: Storage SD (Max. 64GB) / MMC card slot UP to 2T on 2.5 SATA disk
  • Onboard Network: 10/100/1000 Ethernet RJ45,optional WIFI
  • Video Input: A CSI input connector allows for the camera module
  • Video Outputs: HDMI, CVBS , LVDS/RGB
  • Audio Output: 3.5 mm Jack and HDMI
  • Power Source: 5 volt via MicroUSB(DC In Only) and/or MicroUSB (OTG)
  • USB 2.0 Ports: 2 (direct from Allwinner A20 chip)
  • Reset button: Next to MicroUSB connector,Power button: Next to Reset button,Boot button (Optional): Behind HDMI connector
  • GPIO(2X13) pin: GPIO,UART,I2C bus,SPI bus with two chip selects,CAN bus,ADC,PWM,+3.3v,+5v,ground.
  • LED: Power Key & RJ45
  • Remote: IR (Optional)
  • OS: Android 4.2, Linux etc. OS
  • Product size: 92 mm × 60mm
  • Weight: 48g
  • working temp range: -15~75℃


The Banana PI BPI-M1+ is an open-source single-board computer which adds more connectivity to you classic board, it features the same high performance of a dual-core SoC at 1GHz, 1GB of DDR3 SDRAM with Gigabit Ethernet, SATA, USB, and HDMI connections which are found in classic Banana Pi, the Banana Pi M1+ has a onboard WiFi g/b/n. This board can run the following operating systems, Android, Lubuntu, Ubuntu, Debian, and Raspbian. The size the board (PI BPI-M1+) is about the same size as your credit card and is relatively easy to set up, one of the bonus features is its onboard wifi chip.

  Banana PI BPI-M1+ R TBA 
Contact us for a quote
contact details




Key Features

  •     Dual-core 1.0GHz CPU.
  •     1 GB DDR3 memeory.
  •     Mali-400 MP2 with Open GL ES 2.0/1.1.
  •     WiFi onbaord.


  • CPU: A20 ARM Cortex-A7™ Dual-core
  • GPU: ARM Mali-400 MP2 with Open GL ES 2.0/1.1
  • Memory: 1 GB DDR3 SDRAM
  • Storage Support: SD Card(up to 64GB)/SATA(up to 2TB)
  • Onboard Network:10/100/1000 Ethernet RJ45
  • WiFi: WiFi b/g/n
  • Video In: CSI input for video cameras
  • Audio Out: 3.5 mm Jack and HDMI
  • Audio In: On board microphone
  • Power Source: Micro USB, optional 5V DC port (center positive 1,6 x 4,4mm)
  • USB Ports: 2x USB 2.0
  • Buttons: Reset: next to Micro USb
  • Power: next to reset
  • Boot(optional): behind HDMI connector
  • GPIO: GPIO, UART, I2C Bus, SPI Bus with two chip select, CAN bus, ADC, PWM, +3.3v, +5v, ground
  • LED: Power key and RJ45
  • OS: Android, Raspbian, Ubuntu, OpenSUSE, Debian, Bananian
  • Dimensions: 92mm x 60mm
  • Weight: 48g